HomeRepair Pricing
Repair Pricing

Appliance Repair Cost in Denver

A $99 diagnostic, waived with the repair, and a firm written quote before any work begins. Most repairs land between $170 and $1,150.

Call (720) 575-8612

How Pricing Works

We charge a flat $99 diagnostic for the visit, which covers a full inspection and identification of the fault. Once we know exactly what is wrong you get a firm, written quote before any work starts — never a surprise bill afterwards.

If you go ahead with the repair on that same visit, the $99 is waived entirely. Component-level work — sensors, boards, fans, igniters, valves — is the large majority of what we do. Sealed-system and compressor jobs sit well above that, which is why they are listed separately rather than buried in an average.

$99
Diagnostic — waived with repair
Written quote before any work
Parts and labour both included in the quote
Warranty of up to 1 year on the repair
No charge if we cannot fix it

Typical Ranges by Symptom

Planning ranges, not quotes. Where your repair lands inside a range depends on the brand, the model, and which component turns out to be at fault — all of which the diagnostic settles before you commit to anything.

The spread in each range is mostly the badge, not the fault. The same failed drain pump is a different job in a Whirlpool and in a Miele: the part costs less, it is easier to reach, and there is no panel or cabinetry to work around. As a rule the bottom of each range is a mass-market freestanding unit and the top is a built-in from one of the premium lines — so read the low number if you have a Whirlpool, Maytag, Amana or Frigidaire, and the high one for Sub‑Zero, Wolf, Viking, Thermador or Gaggenau.

Symptom Typical range Usually comes down to
Diagnostic / service call $99 Waived when you go ahead with the repair
Refrigeration
Refrigerator not cooling $320–$980 Evaporator fan, defrost circuit, thermistor or control fault
Ice maker not working $245–$740 Fill valve, module, or a frozen supply line
Door or drawer not sealing $210–$525 Gasket, hinge alignment, or a panel-ready door out of true
Wine column not holding temperature $355–$1,250 Damper, sensor, or a dual-zone control fault
Compressor / sealed system $1,300–$3,200 Licensed refrigerant handling, charged for altitude
Cooking
Oven not heating $265–$710 Bake or broil element, igniter, or thermostat
Burner won’t ignite $190–$450 Igniter, spark module, or a clogged orifice
High-altitude gas conversion $145–$320 Orifice kit and re-calibration for Front Range elevation
Induction element or power fault $330–$980 Element, power board, or a failed cooling fan
Dishwashing
Dishwasher won’t drain $195–$490 Pump, check valve, or a blocked drain path
Dishwasher leaking $225–$565 Door seal, sump gasket, or a cracked fitting
Laundry
Washer won’t drain or spin $165–$430 Drain pump, blocked filter, or a tired impeller
Washer won’t start or fill $155–$395 Door interlock, inlet valve, or silted inlet screens
Washer leaking $150–$440 Door boot seal, hose, or the pump housing
Washer drum bearings or suspension $395–$920 Labour-heavy; frequently not worth doing on a budget unit
Dryer not heating $150–$390 Element, thermal cut-out, or a thermistor reading wrong
Dryer not tumbling $140–$340 Drive belt, idler pulley, or drum rollers
Dryer vent and airflow service $110–$260 Full duct clear — fixes most “takes two cycles” complaints
Heat-pump dryer refrigerant circuit $450–$1,150 Sealed-circuit work; no conventional element to replace
Any appliance
Error code / control board fault $285–$1,120 Board, harness, or the sensor the board is reading

What Moves the Price

Which part actually failed
A thermistor and a control board produce identical symptoms and differ by several hundred dollars. Guessing at that before diagnosis helps nobody.
Parts availability for your model
Current models carry stocked parts. Units past fifteen years sometimes need a sourced or superseded component, which moves both price and timeline.
Sealed-system work is its own tier
Refrigerant handling is licensed work, and at Front Range elevation the charge has to be corrected for altitude rather than taken off the tag.
Access and installation
A panel-ready column built into cabinetry takes longer to pull and reset than a freestanding unit, and that time is real.

Repair Cost, Answered

Why ranges instead of one number?
Because a single number before diagnosis would be a guess. The same symptom can trace to a $40 sensor or an $800 board, and quoting the midpoint would be wrong in both directions. The $99 diagnostic replaces the range with a firm figure.
How does the $99 diagnostic work?
It covers the visit and a full inspection, and you get a written repair quote before anything is touched. Go ahead with the repair on that visit and the $99 is waived. Decline it and you have paid $99 for a straight answer about your appliance, with no obligation.
What does a compressor or sealed-system repair cost?
Typically $1,300–$3,200, including parts and the licensed refrigerant handling the work requires. We only quote sealed-system repairs after pressure testing, and at this elevation those readings are corrected for altitude — charging to sea-level numbers is a common reason this repair gets done twice.
Do you charge extra for mountain addresses?
The diagnostic is the same $99 in Evergreen or Conifer as it is in Cherry Creek. Genuinely remote foothill addresses occasionally need a scheduling window rather than same-day, particularly in winter, and we will say so when you book rather than on the day.
Is it worth repairing, or should I replace?
If the repair approaches half the cost of an equivalent new unit and the appliance is well past ten years old, replacement usually wins. We will tell you that plainly. See repair or replace for how we weigh it.
When we tell you not to bother

Two rows in that table regularly cost more than the appliance is worth, and we would rather say so on this page than at your kitchen table. A sealed-system or compressor repair on a mass-market refrigerator, and drum bearings on a budget washer, are both jobs where the labour is the bulk of the price and a new machine is often the better spend.

On a built-in the same two faults usually go the other way, because replacement means matching a cabinet opening and paying for installation as well as the appliance. The diagnostic gives you the real number either way, and the honest recommendation comes with it — there is more on how we weigh that in our repair-or-replace guide.

Want a firm number for your repair?

$99 diagnostic, waived with the repair. Same-day across Denver.

Call (720) 575-8612

*Elite Appliance Repair Denver is an independent repair company. We are not affiliated with, authorized by, endorsed by or sponsored by Sub-Zero, Inc., Wolf Appliance, Inc., Viking Range, LLC, BSH Home Appliances (Thermador, Bosch, Gaggenau) or any other manufacturer named on this site, nor by any of their distributors. All brand names and trademarks are the property of their respective owners and are used here only to describe the appliances we service. We are not a factory service provider and specialize exclusively in out-of-warranty appliance repairs.

© 2026 Elite Appliance Repair Denver. All rights reserved.
600 17th St, Denver, CO 80202 · (720) 575-8612
Call (720) 575-8612